Sensor Probes

[UniquePete]

I’ve just added several sensor probe parts to my Fritzing parts list, three variations of the HDL300 water level probe—2-Wire, 3-Wire and 4-Wire (RS485):



three variations of the QDY30A water level probe (the HDL300 and QDY30A are electrically equivalent, there is just a slight difference in the form factor of the probe)—again, 2-Wire, 3-Wire and 4-Wire (RS485):



and an NPT water pressure transducer:

Because these probes, especially the HDL300, are quite a bit larger than the average module that I use, I’ve also prepared versions of each of these that use a 50% scaled breadboard image. Using the 50% scaled versions has allowed me to create breadboard diagrams that are still electrically correct but are not so visually dominated by the image of the probe.

I’ve also amended and created a 50% scaled version fo the YF-G1 water flow sensor, for the same reason.

[Author]

Posts