Fritzing Parts

The following files are parts files exported from Fritzing, having been created within the Fritzing Parts Editor (using artwork prepared in Adobe Illustrator). All parts have been verified using the fzpzclean and FritzingCheckParts Python scripts. The expectation is that they will ultimately be available on GitHub Fritzing repository.

In the mean time, I've provided a preview (the associated Fritzing 'Breadboard' illustration of the part) and a link to the respective Fritzing part file. Just click on the link to download the file, then double click on the file to open Fritzing and import the part.

I have used most of these parts in my own Fritzing diagrams, although I've never tried to fabricate a PCB using Fritzing drawings (my interest is primarily in the documentation and illustration of hardware configurations). That detail notwithstanding, they should all be OK but, if you encounter any problems, please post a question on the Forum.

NOTE: The holes in PCBs fabricated using Gerbers generated by Fritzing from many of the early versions of the parts below were too small (0.028"—should be 0.038"–0.040") to take a standard male pin header. As of May 2021, this issue has been rectified in all relevant parts provided below.

	74HC4051 8-Channel Analog Multiplexer Module	[38 KB]

	ACS712 Current Sensor Module	[22 KB]

	AJ-SR04M Ultrasonic Distance Sensor Controller Module	[51 KB]

	Amica NodeMCU DevKit 1.0	[57 KB]

	Arduino Pro Mini 35pin Clone 3V3	[51 KB]
	Arduino Pro Mini 35pin Clone 5V	[52 KB]

	BME680 Environmental Sensor Module	[26 KB]

	CCS811 Air Quality Sensor Module	[19 KB]

	DS1307 Real Time Clock Module	[13 KB]

	Elecrow ESP32S WiFi/BLE Board V1.0	[53 KB]

	Elecrow Solar LiPo Charger	[21 KB]

	ESP-12E MCU	[34 KB]

	ESP-12F MCU	[34 KB]

	ESP32-S3-WROOM-1 MCU	[44 KB]

	ESP32-WROOM-32 MCU	[62 KB]

	Heltec CubeCell Dev-Board	[55 KB]

	Heltec CubeCell Dev-Board V2	[64 KB]

	Heltec CubeCell Dev-Board V2.2	[69 KB]

	Heltec CubeCell Dev-Board Plus	[60 KB]

	Heltec WiFi Kit 8	[25 KB]

	Heltec WiFi Kit 32	[63 KB]

	Heltec WiFi Kit 32 V3	[35 KB]

	Heltec WiFi LoRa 32 V1	[60 KB]

	Heltec WiFi LoRa 32 V2	[60 KB]

	Heltec WiFi LoRa 32 V3	[60 KB]

	Heltec Wireless Stick	[85 KB]

	Heltec Wireless Stick Lite	[72 KB]

	Heltec Wireless Stick Lite V3	[61 KB]

	HopeRF RFM9xW Module	[19 KB]

	HopeRF RFM9xW Breakout Board	[39 KB]

	HopeRF RFM9xW LoRa-Pi 14	[50 KB]

	HopeRF RFM9xW LoRa-Pi 16	[43 KB]

	INA219 Current Sensor Module (CJMCU)	[31 KB]

	INA219 Current Sensor Module (GY-219)	[36 KB]

	INA3221 Triple-Channel Current Sensor Module (Black)	[42 KB]

	INA3221 Triple-Channel Current Sensor Module (CJMCU-3221)	[36 KB]

	INA3221 Breakout Board (SunAir)	[103 KB]

	MAX1879 Li Battery Charge Management Module	[51 KB]

	MAX44009 Ambient Light Sensor Module	[14 KB]

	Membrane Switch (Blue)	[6 KB]
	Membrane Switch (Green)	[6 KB]
	Membrane Switch (Red)	[6 KB]
	Membrane Switch (Silver)	[6 KB]

Note that, if different coloured Membrane Switches are installed, any one can be used and the button colour selected or changed via the Inspector.

	microSD Card Reader	[16 KB]

	MPS20N0040D Pressure Sensor Module	[26 KB]

	MT3608 Boost Converter Module	[32 KB]

	NEO-6M GPS Module	[53 KB]

	NEO-7M GPS Module	[43 KB]

	NEO-M8N GPS Module	[54 KB]

	PAM8403 Stereo Amplifier Module	[30 KB]

	PAM8403 Stereo Amplifier Module with Volume Control	[35 KB]

	SSR-1DA60AP Solid State Relay	[29 KB]

	FOTEK SSR-40DA Solid State Relay	[33 KB]

	STM32 'Blue Pill' Dev-Board	[121 KB]

	TP4056 Li Battery Charge Management Module	[30 KB]

	TP5000 Li Battery Charge Management Module	[26 KB]

	TS-300B Turbidity Sensor Controller Module	[34 KB]

	USB to ESP-01 Adaptor	[44 KB]

	USB-TTL UART Adaptor	[30 KB]

	VEML6075 UV Sensor Module	[13 KB]

	YF-G1 Water Flow Sensor	[43 KB]

	ZMPT101B Voltage Sensor Module	[61 KB]