[UniquePete]

See BME680 Module

[UniquePete]

See NEO-6M part

[UniquePete]

See Reply To: NEO-7M GPS Module

[UniquePete]

Like the BME680, the NEO-6M (GY-NEO6MV2) just needs to be ‘verified’, which usually requires just a little bit of a tidy-up, so I’ll try to do that this evening too.

I only have the 6M module, but if the 7M is only different in labelling, I can do that at the same time.

[UniquePete]

It’s pretty well complete. I’ll try to finish it this evening.

[UniquePete]

See http://digitalconcepts.net.au/pcbs/index.php?op=pcbdesign

[UniquePete]

Hello Wijnand,

In answer to your questions:

1. Yes, certainly.
2. The easiest way will be for me to send you an Eagle library file containing the base board and you can simply modify that. This is what I did initially—I kept a library window open with a copy of the fully ‘populated’ base board while I worked on a particular board design, just deleting pads from the fully populated board in the library window, saving the modified element, then reloading the base board I was working on. All the pads are numbered by column and row, so any particular pad is easy to identify and locate.

I haven’t tried to export a library from Eagle yet, but it can’t be difficult. I’ll provide a link to my library somewhere and let you know, or I can just send the file to you directly.

• This reply was modified 5 years, 10 months ago by UniquePete.

[Author]

Posts